| AW Soft start / 3 level incan driver switch for using high power LA in Surefire P/C/M/Z series. The switch offers a solution for running high power lamps with bulb saving soft start feature + 3 level brightness setting to increase runtime + a push button operation. The switch modules are built to fit exact SF tail cap size and will retain the original fit and water-tightness of the stock tail cap. No extra gap - of course. Lock out function with just a quarter turn. A simple drop in design that takes less than 2 minutes to install and is 100% reversible. They 'll work exactly like my Mag C/D smart incan drivers with the same UI. These switches will easily handle 75+W of power. Fits SureFire® Z58 and Z59 switches ONLY Features : - Soft Starting to prolong bulb life and ease amperage draw on the batteries during power up
- 3 brightness level ( PWM controlled ) - 30% - 60% - 100%
- Last brightness setting memory ( default level - 30% )
- Flashing mode
- Simple UI ( click - ON ( low ) - Med - High - click & hold anytime - OFF - click & hold 1.5 seconds - Flashing )
- Input voltage range : 6V - 30V ( Vin = Vout )
- Drive hotwire lamps up to 75W
- Brass housing to withstand heat / heat dissipation
- Power efficiency 99%
- Low resistance
- Panasonic made ' silent ' push button switch
- custom made high tension spring that 'll handle 8+ amp. without deforming / losing tension
- Lock out function with just a 1/4 turn ( recommend for storage and transportation )
- low standby current ~12uA
Installation Instructions : - Unscrew the top of the Z58/59 and remove the guts
- drop in the driver switch
- peel off the included rubber pad and stick it onto the rubber boot
- screw back the top
|
