| Specification - Material : Solid Titanium bezel, head and body
- Finish : Bare Titanium (have some minor scratches)
- Lens : Sapphire Crystal Glass , optical grade
- LED : SSC P4 U2 bin
- Driver : Buck-Boost converter with 3 regular brightness levels and 4 hidden signals.
- Reflector : High quality Orange Peel aluminium reflector
- O-ring sealed Twist On-Off (no battery rattle)
- Battery : One 3V CR123A or one 3.6V RCR123A (recommend AW's protected Li-Ion cell)
- Dimension: Diameter 21mm, Overall Length 72mm
- Accessories : Titanium Pocket Clip, 2 Split Rings (one stainless steel, one brass)
- Tritium hole for 1.5mm X 6.5mm (No tritium included)
- Pocket Ti have modular led system so you can upgrade led or led module youself later.
- No commercial packing
Driver and Brightness levels, Hidden Signals - The BitZ Pocket flashlight uses Buck-Boost converter and it will control power to the LED even though you use 3.6V rechargeable Li-Ion battery. So, LED will not be damaged by unregulated high current from Li-Ion battery. Regulation ensures that brightness from regular 3V CR123A and 3.6V rechargeable Li-Ion battery will be same.
- Input voltage range : 1.8V ~ 5.5V
- There are basic 3 Brightness levels (Medium-Low-High) and hidden 4 Signals (Strobe-Locater-Extreme Low-S.O.S.)
- Brightness (estimated) : High (120~130lumen), Medium (30~40lumen), low (10lumen)
- Current to LED (tested) : High (500mA), Medium (150mA), Low (30mA)
- Rumtime (tested) : High (1~2 hours), Medium (3~6 hours), low (12~24 hours) depending on 3V or 3.6V.
- Runtime for Signal mode (RCR123A, CR123A) : Strobe (8, 12 hours), Locater (24, 36 hours), Ext.Low (45, 70 hours), S.O.S. (8, 12 hours)
- Basic 3 brightness levels has Memory Function. You will get next level by Off and On within two seconds.
- You will get into Signals by consecutive 8 On and Off. No memory function for Signal.
- Locater signal : useful mode for tracking and camping as "follow me" signal or location signal.
- Extreme Low : This mode is useful as a overnight candle at tent. Current to LED is 10mA.
Caution - Do not leave flashlight alone while it's on high brightness level, it will be VERY HOT within a few minutes. You can be hurt by heat and battery will be destroyed.
- BitZ recommends you to use AW's protected Li-Ion battery (R123A) if you want to use rechargeable battery. They do not recommend other Li-Ion battery.
- Do not use pocket clip for belt The pocket clip doesn't have enough strength(tention) and room for thick leather belt, use clip just for thin fabric pocket. Use T8 Torx wrench to remove clip from body.
- You will feel twist action for on-off very tight when you open box but it will become smooth after many twisting action even though it's not super smooth as aluminium. You can't feel smooth twist feeling from titanium same as aluminium.
|
