This page is outdated and no longer updated as of April, 2008

Fenix Flashlight Smooth vs. Textured Reflector Comparison
The smooth relfector gives slightly more throw (the beam goes a little further), but there are dark rings in the output when the beam is shone against a white wall. The textured reflector gives a more even output, as shown in the beamshot pictures below. This image shows the smooth reflector on the left and the textured reflector on the right:

Beamshot comparisons

All beamshots are on turbo mode at 5 feet with standard batteries. The camera automatically compensates for the brightness, so the different models appear the same brightness in the beamshots below, but when viewed normally. These beamshots used Fenix flashlights with the normal Cree LEDs, but the output from the Cree Q5 LEDs looks the same, just brighter.

P1 CE	P1 CE Textured	P3D CE	P3D CE Textured	L2D CE	L2D CE Textured

Size Comparison Picture -

Model	Price	Switch Type	LED	Battery	Dimensions	Weight with Battery	Levels	Output Lumens	Run Time Hours	Colors	Picture
E0	$18.50	Twist	Nichia 5mm	AAA	2.6" x .5" 67.5mm x 12mm	.8 oz 22 gm	One	5.5	11 hrs bright 20 hrs total	HA Black
E1	$23.50	Twist	Nichia Rigel	AAA	2.85" x .55" 72.5mm x 14mm	.9 oz 26 gm	One	12	3	HA Black
L0D CE	$43.50	Twist	Cree LED	AAA	2.85" x .55" 72.5mm x 14mm	1 oz 28 gm	Five	20 / 7.5 / 50 Strobe/SOS	3.5 / 8.5 / 1	Black
L1D CE	$52.50	Tailcap Click	Cree LED	AA	3.8" x .8" 97mm x 21mm	1.7 oz 48 gm	Six	9 / 40 / 80 / 90 SOS/Strobe	25 / 5 / 2 / 1.5	Black
L2D CE	$53.50	Tailcap Click	Cree LED	AA	5.8" x .8" 147mm x 21mm	1.7 oz 48 gm	Six	9 / 40 / 80 / 135 SOS/Strobe	55 / 10.5 / 4 / 2.4	Black
L2Pv2	$37.95	Tailcap Click	1 Watt Luxeon	2xAA	5.6" x .8" 141mm x 20mm	3.7 oz 104 gm	Two	45 / 7	4 / 33	Black
P1D CE	$53.50	Twist	Cree LED	CR123a	2.8" x .8" 71mm x 20mm	1.6 oz 47 gm	Five	72 / 135 / 12 Strobe/SOS	2.8 / 1 / 21	HA Black
P2D CE	$52.00	Tailcap Click	Cree LED	CR123a	3.5" x .83" 81mm x 21mm	1.34 oz 38 gm	Six	9 / 40 / 80 / 135 SOS/Strobe	30 / 5.5 / 2 / 1	Black HA
P3D CE	$58.50	Tailcap Click	Cree LED	2xCR123a	4.5" x .83" 114mm x 21mm	1.74 oz 49 gm	Six	9 / 40 / 90 / 160 SOS/Strobe	65 / 13 / 4.8 / 1.8	Black HA
T1	69.95	Tailcap Click	Cree Q5 LED	2xCR123a	5.4" x 1.38" 136.5mm x 35mm	5.5 oz 156 gm	Two	225 / 60	1.5 / 10	OD

Notes:

• Specifications including output are from the manufacturer
• The single levels lights provide a brighter beam while the battery is fresh, and a very low output when the battery is mostly depleted. The dual level lights also have a much lower level output when the battery is mostly depleted, but this is not reflected in the chart.
• The two levels on the L1S, L1T, L2Pv2, L2S and L2T are controlled by twisting the head of the flashlight. On and off is controlled by the tailcap switch.
• The L0D and P1D digital models are controlled by turning the power on and off rapidly to change modes. The modes are in this order: Primary - Low - Max - Strobe - SOS
• The L1D, L2D, P2D and P3D digital flashlights have two modes of Texturederation turbo and normal, controlled by twisting the head, and different levels in each mode controlled by turning the power on and off rapidly. With the head tightened all of the way down the flashlight produces max output (turbo) followed by strobe, loosen the head slightly for general mode, with three lower levels of Texturederation plus SOS.

Fenix L1D / L2D / P2D / P3D Flashlights - 2 Modes, 6 Levels - Texturederating Instructions

Turbo Mode - Turbo and Strobe
Twist the head all the way down for TURBO mode
Click the switch for TURBO level, the highest constant output
Click the switch for STROBE level
Click the switch for off

Normal Mode - 3 Levels and SOS
Twist the head all the way down
Click the switch for TURBO level
Unscrew the head slightly for NORMAL mode
The level is now LOW
Click the switch for MEDIUM
Click the switch for HIGH
Click the switch for SOS
Click the switch for OFF

Included Accessories:
Each flashlight includes some accessories from Fenix, these vary by model, here is a list of each model and the included accessories:
E0 - 2 o-rings, 1 split ring
E1 - 1 o-ring, 1 split ring
L0D - pocket clip, 1 o-ring, 1 split ring
L1D - 1 holster, 1 wrist lanyard, 2 o-rings, 1 rubber switch boot
L2D - 1 holster, 1 wrist lanyard, 2 o-rings, 1 rubber switch boot
P1D - 1 holster, 1 o-ring, 1 lobster claw pocket clip
P2D - 1 holster, 1 wrist lanyard, 2 o-rings, 1 rubber switch boot
P3D - 1 holster, 1 wrist lanyard, 2 o-rings, 1 rubber switch boot
T1 - 1 holster, 1 wrist lanyard, 2 spare o-rings, 1 rubber switch boot