| Fenix is offering a specail combination package consisting of:
-P2D Q5 Flashlight in Black Textured Reflector
-L1D Body to convert the P2D into a 1xAA L1D Q5 flashlight
-Storage Cap - securely seals on either body to create waterproof storage for your battery
-Multi-functional Diffuser - use as a soft reading light, an emergency signal, and more
P2D Body - uses a single CR123A battery and combines with the P2D head for a max output of 180 lumens
L1D Body - uses a single AA battery and combines with the P2D head for a max output of 120 lumens
P2D Q5 Description
Congratulations on your purchase of the Fenix P2D Q5. The Fenix P2D Q5 is a high-tech, rugged tool that's perfect for any lighting application. It features six levels of output, which not only allows the user to select the best compromise between brightness and runtime for any given task but also has ability to aid in an emergency. The P2D Q5 does all this and still retains an incredibly compact size. If you're looking for solid reliability, digitally regulated brightness, and compact size, this Fenix is for you. The Fenix P2D uses a single CR-123a battery to drive its Cree X-Lamp LED. The switch button is not only easy to operate with one hand, but it is reQ5ssed into the tail frame so the flashlight can stand up on its end, illuminating a room like a candle. The compact, lightweight, and precision-made flashlight comes with a lanyard as well as a belt case so you can carry it in your pocket or on your belt. P2D Q5 Features: - Utilizes a Cree XR-E LED Q5 Bin with a life of 50,000 hours
- Two modes of output, selected by turning the bezel (patented), Six Levels total
- General Mode: 9 lumens (30hrs) -> 40 lumens (5.5hrs) -> 80 lumens (2hrs) -> SOS
- Turbo Mode: 135 lumens (1hrs) -> Strobe
- Digitally Regulated for Constant Brightness
- Uses one 3V CR123A battery
- 8.04cm (L) x 2.1cm (D)
- Made of aircraft grade aluminum
- Durable Type III hard anodized finish
- 38.2-gram weight (excluding batteries)
- Water-resistant (dunkable)
- Toughened ultra clear glass lens with AR coating
- Push-button tail cap switch
- Capable of standing up securely on a flat surfaQ5 to serve as a candle
- Input voltage 2.0V-4.2V (works with RCR123 battery turbo mode only until battery voltage falls below 3.5V)
L1D Q5 Description:
The Fenix L1D Q5 is a high-tech, rugged tool that's perfect for any lighting application., it features six levels of output, which not only allows the user to select the best compromise between brightness and runtime for any given task but also has ability to aid in an emergency. The L1D Q5 does all this and still retains an incredibly compact size. If you're looking for solid reliability, digitally regulated brightness, and compact size, this Fenix is for you. The Fenix L1D uses a single AA battery to drive its Cree X-Lamp LED. The switch button is not only easy to operate with one hand, but it is reQ5ssed into the tail frame so the flashlight can stand up on its end, illuminating a room like a candle. The compact, lightweight, and precision-made flashlight comes with a lanyard as well as a belt case so you can carry it in your pocket or on your belt. L1D Q5 Features: - Utilizes a Cree XR-E LED Q5 Bin with a life of 50,000 hours
- Two modes of output, selected by turning the bezel (patented) - 6 Levels total
- General Mode: 9 lumens (25hrs) -> 40 lumens (5hrs) -> 80 lumens (2hrs) -> SOS
- Turbo Mode: 90 lumens (1.5hrs) -> Strobe
- Digitally Regulated for Constant Brightness
- Use one 1.5V AA ( Alkaline, Ni-MH, Lithium ) battery , inexpensive and widely available
- 9.7cm (L) x 2.1cm (D)
- Made of aircraft grade aluminum
- Durable Type III hard anodized finish
- 48.2-gram weight (excluding batteries)
- Water-resistant (dunkable)
- Toughened ultra clear glass lens with AR coating
- Push-button tail cap switch
- Capable of standing up securely on a flat surfaQ5 to serve as a candle
- Input voltage .8V-3.6V (turbo mode only from 14500 batteries until after battery voltage falls below 3.5V)
|
