|
|
Four
independent slots |
|
|
It's
like having four charger-analyzers for AA and AAA NiMH / NiCD batteries.
|
|
|
Large
backlit LCD display |
|
Digitally displays capacity,
voltage, time and current.
|
|
|
Endless programming possibilities
- over 10,000 ways! |
|
|
29
selectable charging and discharging rate. Charging current from 0.2A to 2.0A and
discharging current from 0.1A to 1.0A in 0.1A increments.
|
|
|
Five modes of operation
|
|
|
Charge:
Recharges the battery at the selected rate.
Suitable for batteries used
frequently.
Refresh & Analyze: Charges the battery,
rest for one hour, discharge, rest again, then recharges it. Selectable charging
and discharging rate.
Suitable for batteries stored for more than two
weeks but less than 3 month or those showing poor
performance.
Break-In: Also known as IEC capacity
measurement and "Battery Forming". Charges battery at 0.1C for 16 hours, rest
for one hour, discharges battery at 0.2C, then recharges again at 0.1C for 16
hours.
Suitable for new batteries and those stored for more than 3
month.
Discharge: Discharges the battery at the selected
rate.
Cycle: Performs charge-discharge cycle for up to 12
times with discharge capacity stored in memory. Recharges battery after final
cycle.
|
|
|
New
ways to take care of your batteries and maximize runtime!
|
|
|
Battery
Matching
In most devices, usually two or more batteries are used
together. When batteries are used in a series, the performance is limited by the
worst one. In other words, one poorly performing battery can significantly
reduce the device runtime.
Battery matching refers to grouping batteries
with similar “actual” capacity. To perform this, use the Refresh & Analyze
mode to determine the battery capacity. Group batteries with capacity within
about +/- 5% of the rated capacity.
Battery
Forming
New batteries and those stored for extended period become
chemically deactivated. Battery forming is a charge-discharge-charge cycle which
forces a full charge into the battery at a very slow rate. This process
activates the battery. In certain cases, it needs to be repeated two or three
times.
Battery forming can be performed using the Break-In mode.
|
|
|
Delivers just the right charge
|
|
|
Independent negative delta V,
temperature and timer protection eliminates over and undercharging.
|
|
|
Super
light travel worldwide power supply and 12V compatible |
|
|
Worldwide
100-240V switching adapter - light weight and small. Also compatible with 12V
input. Will work on car when used with the optional cigarette lighter
adapter. |
