|The Dual Mode Pressure Switch by iPROTEC is just over 17
in its recoiled position, but can extend to over 3 to suit your
specific needs. The most important feature is the dual mode. The dual
mode feature is two buttons in one switch so that you can independently
control your lights functions by choosing momentary or steady on. The
steady switch uses hard/soft touch technology allowing settings to be
changed in two different ways.
1. Hard touch: Simply click through the functions (light
will turn off in between settings.)
NOTE: Some lights will reset to first setting (100% ON)
after being off for 10 seconds.
2. Soft touch: Press button halfway with no click. This
allows the user to cycle through the settings quickly
without the light turning off between settings.
The momentary switch activates the light only while pressure is being
applied to the button. (Light will change settings with each use.
*NOTE: Some lights will reset to first setting (100% ON) after being off
for 10 seconds.) PROTEC Dual Mode Pressure Switch is the accessory to have, especially if you already have NEBO® or iPROTEC flashlight.
Dual switch incorporates two buttons inside the switch, one for momentary operation and the other for steady on.
Specifically designed to be used with the following products:
#5557, #5581, #5599 & #5610 NEBO® REDLINE®
#5565 PROTEC Laser / Flashlight Combo
#5566 PROTEC Elite Laser / Flashlight Combo
#5586 U.S. Army TAC-110Z
#5463, #5564 NEBO® CHAMELEON
#5624 NEBO® REDLINE® 220 Lumen Bright Light
#5630 PROTEC REDLINE®
#5631 PROTEC GREENLIGHT
#5632 PROTEC REDLIGHT
#5929 PROTEC PRO-220 Light
- Length Coiled 17.71 (450 mm)
- Extended 39.37 (1,000 mm)
- Weight 0.15 lbs.